Welcome Guest
[Login | Register]
View costs in your currency
Your Cart Items: (0)
JammaBoards.com is a supplier of Arcade Gaming Parts
Location: /Adapters

6-in-1 MultiJAMMA Switcher PCB

6-in-1 MultiJAMMA Switcher PCB
More Images:
6-in-1 MultiJAMMA Switcher PCB 6-in-1 MultiJAMMA Switcher PCB

Product Information

Install up to six different JAMMA (or non-JAMMA with the use of a JAMMA Adapter) PCBs into a single JAMMA cabinet with ease! This 6-in-1 MultiJAMMA switcher unit is simple to install and works with just a quick press of the wireless remote. The switcher function is wireless so there is no need to drill out a new 'switch' button into your control panel or cabinet. The wireless remote features push buttons labeled 1 through 6, so any PCB and be directly accessed without the need to scroll through each MultiJAMMA slot.

Setup is quick and easy:
1 - Install the 6-in-1 MultiJAMMA Switcher PCB into your JAMMA ready arcade cabinet (on cabinet floor is ideal if possible).
2 - Connect the 6-in-1 MultiJAMMA Switcher PCB into your JAMMA cabinets connector.
3 - Install your other JAMMA PCBs (or non-JAMMA PCBs with the use of a JAMMA Adapter) into one of the open 6-in-1 MultiJAMMA Switcher PCB slots (Slot closest to the JAMMA connection is slot 1 / furthest is slot 6).
4 - Power on your cabinet and enjoy!

Power on your cabinet and your ready to play. When you want to switch over to another installed PCB, just press the button on the included mini wireless remote! The switcher safely cuts power to the active PCB, then switches power and all functions over to the other PCB.
 

Dimensions:
  • PCB - 21.9cm / 8.625" (W) x 29.5cm / 11.615" (L)
  • Remote - 3.5cm / 1.375" (W) x 8.3cm / 3.25" (L) (excluding antenna)


    This Kit contains:
  • 6-in-1 MultiJAMMA Switcher PCB
  • Wireless Six Channel Remote
  • (4) Mounting Feet with screws 


    ** Importance Notice / -5VDC Wiring Option: **
    The 6-in-1 MultiJAMMA Switcher PCB will only properly work with standard JAMMA PCBs requiring +5VDC and +12VDC only. Certain Midway JAMMA PCBs such as Mortal Kombat, Killer Instinct, etc require -5VDC to also be connected for proper sound operation. If you intend to install any PCBs requiring -5VDC to be installed, be sure to add the -5VDC Wiring Option/Upgrade to the PCB order.



    Recommended Accessory for this item:
    *
    JAMMA Extender Harness



  • Share |

    Price: $99.95


    Product Options:
    Install -5VDC Wiring onto PCB?:







    Product Code: PCB-6in1Switcher
    In Stock: 35 
    Quantity: Add to Basket
    This item has been reviewed by 4 people.
    Login to rate this item

    Excelent and works very very well.
    michael
    June 2008
    I have used this on my project C-Macc's using 6 Jpacs to convert to 1 single arcade unit (jamma based). It works perfectly all though wish there was the ability to use more buttons on it. All so would be nice to wire up a switch instead of wireless but this does not effect the way it works. 10 out of 10. would recommend to anyone.
    Great Product
    Michael
    July 2008
    Only down side seems to be that there isn't a default board that is powered. You always have to select 1-6 on the remote before you can access a game. Other than that it works very smoothly. Good value. I would also suggest buying 16 PCB feet, so that the 4 corners of the board are supported as well as each jamma socket supported.
    Works as it should, with a few quirks..
    Ryan
    August 2008
    Works really slick, just make sure you support those PCB's that get plugged in. Don't need to put unnecessary stress on them. A few things that YOU need to know. 1. There is no manual switch, so don't loose the remote. 2. ALL +5 volt legs MUST be hooked up via your, threw your Jamma connector to this 6 in 1 from your power supply, as a Game PCB might function and share +5 volts if only one leg is hooked up, This 6 in 1 does not share and requires all +5 Volt legs to be hooked up. (3 & C, 4 & D respectively) Also hook up your 12volt. This may help power the switcher chip that is on it. 3. The -5 volt Leg DOES NOT work with this 6 in 1 board. So if you have a game that requires -5 volts, this switcher will not work, unless you hard wire it from your power supply directly to your PCB game board. 4. FYI, this does NOT power all the boards at once. So that is a good power saving feature, it just powers the one you want to use. That's it, I love it. It powers my 60 in 1, Pac-man, Rally bike, Twin Eagle and Sky Soldiers. It is so nice to not have to open the cabinet just to switch games all the time. Enjoy!!
    Works like advertized
    james
    September 2008
    The switcher was easy to install. The only problem was the -5volt was dead-ended at edge connector. I ended up jumping the -5v to each slot that needed it. I installed relays to cut the -5v to the slot when not powered up. Now each game works perfectly.

    Go to the JammaBoards.com information site!