NeoGeo MVS to JAMMA Inline Adapter

More Images:

Product Information

-: NeoGeo MVS to JAMMA Inline Adapter :-

 Safely install a Multislot MVS in your JAMMA cabinet!

Authentic JammaBoards.com NEW Item

  

 

---

Item Description:
Safely converts the standard NeoGeo MVS system pinout to work correctly in a standard JAMMA type arcade cabinet.  All NeoGeo MVS units are almost fully JAMMA compatible; however, they have a small twist in their pinout scheme.  Connecting a NeoGeo MVS system directly into a JAMMA connection will damage the MVS audio amplifier!  The most important feature of this MVS to JAMMA adapter is to safely convert the MVS stereo output to work in the standard JAMMA single speaker setup. If the JAMMA cabinet has stereo speakers, this adapter also provides an easy 4 pin Molex connection for crisp stereo sound (this is the preferred, but not necessary, solution).

  All other additional benefits and features are listed below.

• Corrects MVS AUDIO for use in a standard JAMMA single speaker system
• Standard Molex connector is provided for optional JAMMA stereo speaker setup.

   

   

  
  Item Details:  
  ** J1 Interface / J2 Stereo Output cables are not included. If needed, they can be optionally added when adding this adapter into the shopping basket (see below).
  
  ** J1 Interface cable contains 10 color coded wires, professionally crimped into a mating Molex 2.54mm 10 pin connector. All wires have standard .187" quick disconnect terminals attached for fast installation. This harness is only recommended if you intend to connect any of the J1 Interface connections.  Remember, Player 1/2 button D are also connected to JAMMA side pins 25/cc so the J1 is just another connection option. Also, the Game Select features are also already routed to Players 1 & 2 button A so that connection on the J1 Interface is only required if you would like to install separate Game Up/Down selector buttons.

  ** J2 Stereo cable uses 4 color coded wires, approx. 6.5' in length, and professionally crimped into a mating Molex 2.54mm 4 pin connector. All wires have crimped on .250" quick disconnect terminals for a fast connection directly up to the speakers.  This is only required if the installation JAMMA cabinet has two 8-ohm speakers installed for stereo sound.

  ---

• Corrects Test switch positioning so the JAMMA cabinet's Test switch will function properly with the MVS.
• Adapts the NeoGeo MVS ‘Game Select’ Up/Down feature to work with the existing JAMMA cabinets Player 1 & 2 first shooter buttons, eliminating the need to install new selection buttons.
• Routes the NeoGeo MVS 'D' Button from each player to matching connection on JAMMA side (Pins 25/cc).
• Optional Test and Service/Credit hook-ups are located directly on the MVS to JAMMA adapter board. 
• Simple design allows this adapter to easily be placed inline between your JAMMA connector and your NeoGeo MVS 56-pin connector.
• Mounting holes are located in each corner, making for an optional strong cabinet installation. 

Price: $24.95

• Tell a Friend