 |
Search for:
Shop by Category
Featured Product
Popular Products
- 48-in-1 Original Classic Arcade Multigame/Multicade - JAMMA PCB
- 60-in-1 iCade Classic Arcade Multigame/Multicade - JAMMA PCB
- Jamma Fingerboard JB-1 Adapter
- JAMMA Full Cabinet Wiring Harness Loom
- 1066-in-1 Games Family Multigame JAMMA System
- JAMMA PLUS (JB-2) Fingerboard Adapter
- 56 Pin Card Edge Connector (3.96mm/.156 pitch)
- Mortal Kombat 2-4 - Killer Instinct JAMMA+ Kick Harness
- CAPCOM CPS-2/CPS-3 AUXILIARY KICK HARNESS
- JAMMA Wiring kit!
Sale Items
- 60-in-1 iCade Classic Arcade Multigame/Multicade - JAMMA PCB
Save $140.00 - 48-in-1 Original Classic Arcade Multigame/Multicade - JAMMA PCB
Save $115.00 - 173-in-1 BabyStar Multigame Horizontal JAMMA PCB
Save $90.00 - 465-in-1 BabyStar Multigame Vertical JAMMA PCB
Save $90.00 - 1069-in-1 Games Family Multigame JAMMA System
Save $90.00
Payments Accepted
 |
Online References
 |
|
 |
|
Location: /Jamma Adapters
 |
This item has been reviewed by 1 person. |
|
|
Needs to be cut if soldering to 56 pin edge connector |
| DaveDecember 2007 | I bought these and some EC-56 edge connectors to make some jamma extensions (adding autofire and RGB out to jamma harness)and found these fingerboards need 1/8 cut off the top (where the numbers are) in order to be soldered to the pin side of the EC-56 jamma edge connector. A dremel, mask, and steady hand are required to cut these. Otherwise great fingerboard. I think it would be cool if Jammaboards offered trimmed and non-trimmed versions so people don't have to do the cutting. |